How do I Post Calibrate FieldOp Data?

Overview:

In some instances, you may find it necessary to post calibrate your recorded yield monitor weight and/or moisture to a known weight and/or moisture from sources such a scale ticket.  

Requirements:

• Uploaded fieldop data

Process:

When post calibrating for weight and/or moisture, you can adjust the harvest results of a load/region, an entire field, or both. The original values are retained, but the harvest operation displays by the adjusted values.

1. Select the Grower in the Resources tree
2. FieldOps | FieldOp Viewer
3. Select the Harvest task
4. Select the field or op region you want to post calibrate 
5. Click the icon
6. Calibration by Weight and/or Moisture
1. The number of regions selected is shown
2. Check the box next to Calibrate Weight to enable the Actual Weight 
3. Enter the actual weight of the operation or opregion(s) selected
4. Check the box next to Calibrate Moisture to enable the Actual Moisture
5. Enter the actual moisture of the operation or opregion(s) selected
7. Prior Calibration
8. Select the appropriate method for handling previously calibrated operations or opregion(s)

Refer to the Help within FieldOp Viewer for details about post calibration.

Related Articles:

Working with FieldOp Data
How do I use the Spatial FieldOps Linker to manually link logged data?
How do I use the FieldOp Resource Linker to match data logs to an AgStudio database?